Top Entry Ball Valve
Top Entry Ball Valve Description The Top Entry Ball Valve is a highly efficient valve that provides an exceptional sealing performance with only a 90-degree rotation and minimal torque. It is designed with a perfectly equal inner cavity, ensuring a low resistance and straight flow path for the medium. The valve is larger in size […]
Top Entry Ball Valve Description
The Top Entry Ball Valve is a highly efficient valve that provides an exceptional sealing performance with only a 90-degree rotation and minimal torque. It is designed with a perfectly equal inner cavity, ensuring a low resistance and straight flow path for the medium. The valve is larger in size and crafted from superior materials compared to typical household valves, with its surface coated for a sleek finish.
The Top Entry Ball Valve is simple in structure, small in size, quick to open and close, and easy to operate. It has the lowest flow resistance and does not interfere with the transmission of the medium. In addition, it can be reliably used in corrosive media and low boiling point liquids as it does not jam during operation. Moreover, a complete seal can be achieved over a wide range of pressures and temperatures.
|Sizes||2 to NPS 48|
|Pressure Class||150 to 2500|
|Forged Materials||A105, A182 F304, F304L, F316, F316L, F51, F53, A350 LF2, LF3, LF5|
|Casting Materials||A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2|
|Other Materials||Inconel, Hastelloy, Monel|
|Bore||Full or Reduced|
|Connection||RF, RTJ, or BW|
|Entry Design||Top Entry design|
|DBB||Double Block & Bleed (DBB)，Double Isolation & Bleed (DIB)|
|Seat Injection||Emergency seat and stem injection|
|Anti-Blow out||Anti-Blow out Stem|
|Extended Stem||Cryogenic or High Temperature Extended Stem|
Design & manufacture according to API 6D, API 608, ISO 17292
Face-to-face according to API 6D, ASME B16.10
End Connection according to ASME B16.5, ASME B16.47, MSS SP-44 (NPS 22 Only)
Test & inspection according to API 6D, API 598
Fire safe design according to API 6FA, API 607
Also available per NACE MR-0175, NACE MR-0103, ISO 15848
Advantages of top entry ball valve
One of the main advantages of the top entry ball valve is its high durability and longevity. These valves are designed to withstand high pressures and temperatures, and can operate in harsh environments without experiencing significant wear and tear. Additionally, the valve is easy to maintain and repair, which can help minimize downtime and reduce costs.
Another advantage of the top entry ball valve is its enhanced safety features. The valve is designed to provide a tight seal, which can prevent leaks and reduce the risk of accidents or environmental damage. Additionally, the valve can be equipped with various safety devices, such as emergency shut-off systems or pressure relief valves, to ensure optimal safety in hazardous environments.
Applications of top entry ball valve
Top entry ball valves are used in various industrial applications, including the oil and gas industry, chemical industry, power generation industry, and water treatment industry. In the oil and gas industry, these valves are used to control the flow of crude oil, natural gas, and other petroleum products. In the chemical industry, the valve is used to control the flow of various chemicals, including acids, solvents, and bases. In the power generation industry, the valve is used to control the flow of steam and other fluids in power plants. In the water treatment industry, the valve is used to control the flow of water and other liquids in treatment plants.
Selection and installation of top entry ball valve
When selecting a top entry ball valve, there are several factors to consider, including the type of fluid or gas being controlled, the pressure and temperature requirements, and the size and configuration of the valve. It is also important to choose the right materials for the valve components to ensure optimal performance and longevity.
The installation of the top entry ball valve is a crucial step in ensuring its proper functioning. It is important to follow the manufacturer’s instructions carefully and to ensure that the valve is installed correctly. This includes proper alignment of the valve with the piping system and proper torquing of the valve bolts to ensure a tight seal.
Q: What is the Top Entry Ball Valve used for?
A: The Top Entry Ball Valve is used to control fluid flow in industrial applications.
Q: What industries is the Top Entry Ball Valve suitable for?
A: The Top Entry Ball Valve is suitable for use in a wide range of industries, including oil and gas, chemical processing, and power generation.
Q: Is the Top Entry Ball Valve easy to install and maintain?
A: Yes, the Top Entry Ball Valve is designed for easy installation and maintenance.