What Are The Problems With Installing Stainless Steel Ball Valves?
Stainless steel ball valves are widely used in different industries as they are suitable for various working mediums, including corrosive media. However, installing stainless steel ball valves can be tricky, and there are some problems that one may face during the installation process. In this post, we will discuss the problems that may arise during the installation process of stainless steel ball valves.
Connection with Pipeline
Before installing the stainless steel ball valve, it is necessary to rinse and remove impurities from the clean pipe. Failure to do so may result in clogging of the valve and cause problems during operation. It is also essential to check the valve’s signs and ensure that the valve is intact. The valve must be fully open and closed several times to confirm its normal operation. The protective cover on both sides of the flange should also be removed, and the valve should be rinsed clean while fully open.
Stainless steel ball valves should be installed horizontally or vertically in the pipeline. The installation point should not be near the pipeline’s low point or bear external force. In such cases, a pipe support or support should be used to eliminate the pipeline’s deviation. Any end of the valve can be mounted on the upstream side, but a valve driven by the handle can be mounted at any position on the pipe. However, a gear box or pneumatic drive ball valve should be installed upright in a horizontal pipe, and the drive device should be above the pipeline.
Connection with Pipeline
During the installation process, it is important to use the specified torque on the flange of the bolt to be symmetrical, successive, and uniformly tightened. Failure to do so may result in leakage, which could cause damage to the valve and pipeline. It is also important not to use the stainless steel ball valve actuator part of the lifting point as lifting during the installation period to avoid damage to the implementing agencies and accessories.
In conclusion, installing stainless steel ball valves requires attention to detail, and there are several problems that can arise during the installation process. However, by following the above guidelines, one can ensure that the installation process is smooth and the valve operates efficiently. It is also important to note that regular maintenance of the valve can help prevent issues during operation.